Installing blinds can seem daunting, but with the proper preparation and techniques, even novices can install blinds successfully. This article will provide tips and tricks for a smooth DIY blinds installation. Additionally, consider your overall design scheme, including options like exterior shutter paint colors, to ensure a cohesive look for your home.
When installing DIY blinds, such as Ziptrak blinds in Melbourne, it’s essential to follow proper techniques for a successful outcome. By following these DIY blinds installation tips and tricks, including those specific to Ziptrak blinds in Melbourne, you can enjoy a hassle-free installation process and beautiful results that enhance your living space or outdoor area.
Assess the Window Area
Before purchasing blinds, assess the window area thoroughly. Here are some critical steps:
Measure Precisely
Use a steel tape measure to measure the width and height of the window opening—round measurements up to the nearest eighth of an inch. Measure separately if windows are different sizes.
Determine the Type of Mounting
Decide if blinds will be installed inside the window frame (inside mount) or outside the frame (outside mount). Inside mounts have a built-in light seal, while outside mounts are easier to install.
Check for Obstructions
Note any obstructions like handles and moulding that could interfere with blinds. Account for these when measuring and selecting hardware.
Take Photos
Take photos of the window area for reference when shopping. Photos are handy for double-checking measurements, too.
Purchase Proper Blinds and Hardware
Once measurements are taken, it’s time to purchase blinds and hardware.
Order Precise Sizes
Use your measurements to order blinds in the sizes needed for each window. Avoid having to make alterations after purchase.
Buy Additional Hardware
Purchase extra brackets, screws, anchors, and specialty hardware like spacers and extender brackets. Having spare hardware on hand prevents mid-project delays.
Match Valance Size
If using a valance, note the valance width and account for proper side clearance when ordering blinds.
Choose Cordless for Child Safety
If minor children are present, choose cordless blinds or add safety cleats to corded blinds.
Prep the Work Area
Installation will go smoother with proper prep.
Clear the Space
Remove drapes, blinds, and window treatments and remove any furniture from the work area.
Protect the Flooring
Cover the flooring below the window with a drop cloth to prevent damage from fallen parts and tools.
Gather Tools
Have all necessary tools available, including tape measure, drill, screwdriver, level, pencil, pliers, and stepladder.
Read Instructions Thoroughly
Review all instruction booklets and manuals before starting. Preparation prevents errors.
Check Hardware and Parts
Confirm all brackets, screws, wands, slats, and other blind components are present.
Follow Proper Installation Techniques
With prep work complete, it’s time for installation. Follow these tips and tricks:
Measure Twice, Drill Once
Double-check bracket measurements before drilling holes. Use painter’s tape to mark drilling spots.
Use Wall Anchors
Use hollow wall anchors to reinforce brackets for drywall and plaster wall stability.
Level Properly
Check that bracket tops are perfectly level. Use shims if necessary to prevent tilting.
Allow Side Clearance
When mounting in the opening, position brackets to allow proper side clearance for blind operation.
Check Blind Function
After mounting brackets, attach slats and lower blinds to confirm smooth operation before finalising.
Take Your Time
Work slowly and deliberately. Rushing leads to crooked blinds and damaged parts.
Use Child Safety Devices
If installing corded blinds, attach cord cleats firmly to prevent strangulation hazards.
Finish Strong with Adjustments and Valance
The final step is to complete the installation.
Adjust Slats
If slats are uneven, gently bend them into alignment using pliers wrapped in cloth.
Set Wand Angle
Position the angled wand for easy access to raise and lower blinds.
Attach Valance
If using a valance, install it centred over the window using the provided hardware.
Check All Brackets
Do a final check that all brackets are firmly attached with appropriately sized screws.
Dispose of Packaging Properly
Break down boxes and dispose of all plastic packaging to avoid harming pets and wildlife.
DIY blinds can be installed successfully with the right tools, materials, and techniques. Adjusting blinds, adding safety devices, and mounting valances are the perfect finishing touches. Follow these tips and tricks for professional-looking window treatments completed on your schedule and budget.
Conclusion:
Installing window blinds on your own may seem intimidating initially, but even novices can transform their windows with beautiful new blinds armed with the proper preparations, materials, and techniques. Following the tips and tricks outlined above will help achieve a smooth DIY blinds installation, resulting in stylish, functional window treatments. With precisely measured blinds, proper hardware, safe installation practices, and final adjustments, you can complete a DIY blinds project to be proud of.
